异质性环境规制对绿色全要素生产率的影响机制——基于能源消费结构的调节作用

为探讨能源消费结构调节下异质性环境规制对绿色全要素生产率的影响机制，论文利用SBM方向距离函数测得全国各省市“经济-资源-环境-社会”四位一体的绿色全要素生产率，并将环境规制工具分为命令控制型、经济激励型、治理投入型和公众参与型4类，构建了空间杜宾模型以及门槛效应模型，进而得出在能源消费结构调节下，异质性环境规制对绿色全要素生产率的直接作用、间接作用以及空间溢出效应。研究结果表明：1）经济激励型和公众参与型环境规制通过调节能源消费结构对当地和邻地的绿色全要素生产率产生影响；2）在门槛检验方面，能源消费结构对命令控制型、经济激励型和公众参与型环境规制影响绿色全要素生产率存在门槛效应，同时在能源消费结构调节下，命令控制型和经济激励型环境规制对其本身对绿色全要素生产率的间接作用存在门槛效应。建议政府在制定环境规制时要考虑到其与能源消费结构的交互作用，并且在不同能源消费水平地区采用适宜的规制方法和强度，以更好地发挥环境规制作用。     

长江经济带城市生态效率演变及驱动因素分析

城市生态文明建设依托于生态效率的改善，基于2005—2016年长江经济带107座城市面板数据，采用超效率SBM（slacks-based measure)模型测算生态效率，并结合探索性空间分析与空间马尔科夫链等探讨生态效率时空演化格局的内在规律， 实证分析生态效率驱动因素的影响效果。研究表明：2005—2016年经济带生态效率总体呈平稳态势，上、中、下游呈现“阶梯型”分布，下游依次优于中游和上游地区，部分地区生态效率呈“两级型”分化趋势；城市间生态效率发展存在空间联动效应，与生态效率高的城市为邻，其正向溢出作用促进城市状态向高水平跃迁，而与生态效率低的城市为邻，其负向作用拉动城市状态向低水平发展；人口规模与产业升级对经济带不同流域具有异质性作用，其提升下游生态效率而抑制中游和上游生态效率，产业升级与生态效率存在“U”型关联，意味着产业升级在短期内并不能使生态效率状态改善，而经济发展有利于促进生态效率向高水平状态演变。     

热冲压工艺参数对22MnB5马氏体钢汽车B柱性能影响的有限元模拟

通过有限元仿真软件Autoform分析了热冲压过程中工艺参数的变化对22MnB5马氏体钢B柱起皱、回弹、减薄、马氏体量以及强度的影响。结果表明:22MnB5马氏体钢B柱热冲压最优化工艺参数为加热温度930 ℃,冷却速率80 ℃/s。该工艺参数下,热冲压过程各处均完成马氏体转变,硬度分布均匀,材料减薄率较低,热冲压成形效果好,尺寸精度高,冲压件强度均大于1400 MPa。     

滚齿工艺对齿根粗糙度的影响

针对国内外风电和工业齿轮箱轻量化的设计趋势,较低的安全系数对齿轮齿根弯曲强度提出了更为严格的要求。研究表明,在材料技术和齿形设计难以再优化的情况下,滚齿加工的粗糙度,尤其是齿根部位的粗糙度对齿轮弯曲强度的影响尤为敏感。针对滚齿工艺过程,从滚齿加工参数、刀具前刀面粗糙度和刀具刃口圆角三方面进行分析,验证其对齿根粗糙度的影响。     

Hierarchical learning using deep optimum-path forest

Bag-of-Visual Words (BoVW) and deep learning techniques have been widely used in several domains, which include computer-assisted medical diagnoses. In this work, we are interested in developing tools for the automatic identification of Parkinson’s disease using machine learning and the concept of BoVW. The proposed approach concerns a hierarchical-based learning technique to design visual dictionaries through the Deep Optimum-Path Forest classifier. The proposed method was evaluated in six datasets derived from data collected from individuals when performing handwriting exams. Experimental results showed the potential of the technique, with robust achievements.     

Microstructure and Mechanical Properties of Mg–RE–TM Cast Alloys Containing Long Period Stacking Ordered Phases: A Review

Casting magnesium alloys hold the greatest share of magnesium application products due to their short processing period, low cost and near net shape forming. Compared with conventional commercial magnesium alloys or other Mg–RE-based alloys, the novel Mg–RE–TM cast alloys with long period stacking ordered(LPSO) phases usually possess a higher strength and are promising candidates for aluminum alloy applications. Up to now, two ways: alloying design and casting process control(including subsequent heat treatments), have been predominantly employed to further improve the mechanical properties of these alloys. Alloying with other elements or ceramic particles could alter the solidifi cation pattern of alloys, change the morphology of LPSO phases and refi ne the microstructures. Diff erent casting techniques(conventional casting, rapidly solidifi cation, directional solidifi cation, etc.) introduce various microstructure characteristics, such as dendritic structure, nanocrystalline, metastable phase, anisotropy. Further heat treatments could activate the transformation of various LPSO structures and precipitation of diverse precipitates. All these evolutions exert great impacts on the mechanical properties of the LPSO-containing alloys. However, the underlying mechanisms still remain a subject of debate. Therefore, this review mainly provides the state of the art of the casting magnesium alloys research and the accompanying challenges and summarizes some topics that merit future investigation for developing high-performance Mg–RE–TM cast alloys.     

Comparison of joint angle,velocity and acceleration estimators for hydraulically actuated manipulators to a novel dynamical approach

Excavators are used for a wide range of applications like earthworks and material handling. Assistance systems are becoming more common to support the operator. For monitoring and control based assistance functions the angular position, velocity and acceleration of the joints from the working implement are required. Commercial systems often use inertial measurement units, consisting of triaxial accelerometers and gyroscopes, to accomplish an estimation of those states. A novel joint angle, velocity and acceleration estimation for hydraulic manipulators is proposed and compared to state of the art methods. A decentralized kinematic filter using no information about the underlying system and a centralized kinematic filter taking the system kinematics into account are implemented as state of the art approaches. Both filters only use inertial measurement units to obtain information about the current state of the system. The novel centralized dynamic filter uses the same information as the centralized kinematic filter and extends it by a dynamic model containing additional information about the angular acceleration due to pressure readings of the hydraulic cylinders. Kalman filtering is used to combine the derived system and measurement models with the sensor information. The methods are evaluated on a material handling excavator for single and coupled movements of the working implement. The novel centralized dynamic filter enables improvements for the angular acceleration estimation compared to the decentralized and centralized kinematic filter. Less noise of the acceleration estimation and a better tracking of the actual acceleration are shown.     

长江经济带工业集聚对水环境污染的影响——基于空间计量与门槛效应的检验

经济发展与生态环境动态良性循环已经成为社会经济发展的重要议题。为实现长江经济带高质量发展，以2007—2018年长江经济带11个省市为样本，采用空间计量和面板门槛模型考察工业集聚与水环境污染之间的关系。研究表明：长江经济带各省市水环境污染具有显著的空间自相关性；长江经济带工业集聚水平和水环境污染表现出先降低后增强的“U”形变化特征，说明工业集聚水平对水环境污染的影响存在一个阈值；长江经济带工业集聚产生的规模效应和结构效应对水环境污染存在显著的双门槛效应，在不同的工业集聚水平下，规模效应和结构效应表现出不同的外部性特征；工业集聚产生的技术溢出效应对水环境污染的影响同样具有显著的双门槛作用；随着各地区工业集聚水平的提高，技术溢出效应对水环境污染的减排作用表现出先强后弱的趋势。     

基于组合双向拍卖的云资源调度方法

针对跨数据中心的资源调度问题，提出了一种基于组合双向拍卖（PCDA）的资源调度方案。首先，将云资源拍卖分为三个部分：云用户代理报价、云资源提供商要价、拍卖代理组织拍卖；其次，在定义用户的优先级及任务紧迫度的基础上，在拍卖过程中估算每一个工作发生的服务等级协议（SLA）违规并以此计算云提供商的收益，同时每轮竞拍允许成交多项交易；最终达到根据用户等级合理分配云资源调度的效果。仿真实验结果表明该算法保证了竞拍成功率，与传统一次拍卖成交一项的组合双向拍卖方案相比，PCDA在竞拍时间段产生的能耗降低了35.00%，拍卖云提供商的利润提高了约38.84%。